A pair of spectacle plate frames after cleaning off the rough cast surface and initial polishing.
Photo: Laurence Armstrong

The spectacle plate hinge receptacle castings being drilled out to take the hinge pin itself.
Photo: Laurence Armstrong

The spectacle plate hinge receptacle castings being drilled out to take the mounting bolts .
Photo: Laurence Armstrong

The spectacle plate hinge pin castings having benn machined down to a standard size.
Photo: Laurence Armstrong

Three of the best pony truck axle box oil pot covers having been straightened. These will need some repair work doing to them eg reattaching hinges etc. The remainder are in very poor condition and so will need to be replaced.
Photo: Laurence Armstrong

The pony truck axle box covers and some of the Krauss Helmholtz components after undercoating.
Photo: Laurence Armstrong